Wires $A$ and $B$ are connected with blocks $P$ and $Q$ as shown. The ratio of lengths,radii,and Young's modulus of wires $A$ and $B$ are $r, 2r$,and $3r$ respectively ($r$ is a constant). Find the mass of block $P$ if the ratio of the increase in their corresponding lengths is $1/(6r^2)$. The mass of block $Q$ is $3M$.

The length of an elastic string is $x \, m$ when the tension is $8 \, N$ and $y \, m$ when the tension is $10 \, N$. The length in meters when the tension is $18 \, N$ is:

To break a wire of $1 \, m$ length, a minimum weight of $40 \, kg \, wt$ is required. Then, the wire of the same material with double the radius and $6 \, m$ length will require a breaking weight of ....... $kg \, wt$.

$A$ mild steel wire of length $1.0 \; m$ and cross-sectional area $0.50 \times 10^{-2} \; cm^{2}$ is stretched,well within its elastic limit,horizontally between two pillars. $A$ mass of $100 \; g$ is suspended from the mid-point of the wire. Calculate the depression at the midpoint.

$A$ copper wire $(Y = 1 \times 10^{11} \, N/m^2)$ of length $6 \, m$ and a steel wire $(Y = 2 \times 10^{11} \, N/m^2)$ of length $4 \, m$,each of cross-sectional area $10^{-5} \, m^2$,are fastened end to end and stretched by a tension of $100 \, N$. The elongation produced in the copper wire is ......... $mm$.

$A$ steel wire of length $L$ at $40^{\circ}C$ is suspended from the ceiling and then a mass $m$ is hung from its free end. The wire is cooled down from $40^{\circ}C$ to $30^{\circ}C$ to regain its original length $L$. The coefficient of linear thermal expansion of the steel is $10^{-5} /^{\circ}C$,Young's modulus of steel is $10^{11} N/m^2$,and the radius of the wire is $1 mm$. Assume that $L \gg$ diameter of the wire. Then the value of $m$ in $kg$ is nearly: