To break a wire of $1 \, m$ length, a minimum weight of $40 \, kg \, wt$ is required. Then, the wire of the same material with double the radius and $6 \, m$ length will require a breaking weight of ....... $kg \, wt$.

Two exactly similar wires of steel and copper are stretched by equal forces. If the difference in their elongations is $0.5 \ cm$,find the elongation $(l)$ of each wire. Given: ${Y_s} = 2.0 \times {10^{11}} \ N/m^2$ and ${Y_c} = 1.2 \times {10^{11}} \ N/m^2$.

$A$ $3 \ m$ long wire of radius $3 \ mm$ shows an extension of $0.1 \ mm$ when loaded vertically by a mass of $50 \ kg$ in an experiment to determine Young's modulus. The value of Young's modulus of the wire as per this experiment is $P \times 10^{11} \ Nm^{-2}$,where the value of $P$ is: (Take $g = 3 \pi \ m/s^2$)

$A$ steel wire is $1 \,m$ long and $1 \,mm^2$ in area of cross-section. If it takes $200 \,N$ to stretch this wire by $1 \,mm$,how much force will be required to stretch a wire of the same material as well as diameter from its normal length of $10 \,m$ to a length of $1002 \,cm$?

The length of a metal wire is found to be $L_1$ and $L_2$ when the tensions $T_1$ and $T_2$ are applied to it respectively. The natural length of the wire is

Two different wires made with the same material have their radii in the ratio $1:2$. Their lengths are also in the ratio $1:2$. If the extensions produced are equal when subjected to different loads,find the ratio of the loads applied.