$A$ steel wire and a copper wire are joined end to end having equal cross-sections. The elongation of the two wires is found to be equal under tension. What is the ratio of the length of the steel wire to the length of the copper wire? (Young's modulus of steel $= 2.0 \times 10^{11} \ N \ m^{-2}$ and Young's modulus of copper $= 1.1 \times 10^{11} \ N \ m^{-2}$)

Two rods of same material and volume having circular cross-section are subjected to tension $T$. Within the elastic limit,the same force is applied to both the rods. If the diameter of the first rod is half of the second rod,then the ratio of the extension of the first rod to the second rod will be: (in $: 1$)

The force constant of a wire does not depend on

The Young's modulus of a wire of length $L$ and radius $r$ is $Y \ N/m^2$. If the length and radius are reduced to $L/2$ and $r/2,$ then its Young's modulus will be

At $40\,^oC$,a brass wire of radius $0.5\, mm$ (diameter $1\, mm$) is hung from the ceiling. $A$ small mass $M$ is hung from the free end of the wire. When the wire is cooled down from $40\,^oC$ to $20\,^oC$,it regains its original length of $0.2\, m$. The value of $M$ is close to ........$kg$. (Coefficient of linear expansion $\alpha = 10^{-5}/^oC$ and Young's modulus $Y = 10^{11}\, N/m^2$; $g = 10\, ms^{-2}$)

$A$ ring of a thin wire of cross-sectional area $a$ and length $l$ is dipped into a liquid of surface tension $\sigma$ and taken out so that a film of liquid is formed in the ring. If Young's modulus of the material of the wire is $Y$,then the longitudinal strain developed in the ring will be: