The force constant of a wire does not depend on

$A$ steel rod has a radius of $10 \,mm$ and a length of $1 \,m$. $A$ $80 \,kN$ force stretches it along its length. If the Young's modulus of the rod is $2 \times 10^{11} \,N/m^2$, then the change in length is

The proportional limit of steel is $8 \times 10^8 \, N/m^2$ and its Young's modulus is $2 \times 10^{11} \, N/m^2$. The maximum elongation,a one metre long steel wire can be given without exceeding the elastic limit is ...... $mm$.

$A$ rod is fixed between two points at $20\,^oC$. The coefficient of linear expansion of the material of the rod is $1.1 \times 10^{-5}/\,^oC$ and Young's modulus is $1.2 \times 10^{11}\,N/m^2$. Find the stress developed in the rod if the temperature of the rod becomes $10\,^oC$.

$A$ brass rod of length $2\,m$ and cross-sectional area $2.0\,cm^2$ is attached end to end to a steel rod of length $L$ and cross-sectional area $1.0\,cm^2$. The compound rod is subjected to equal and opposite pulls of magnitude $5 \times 10^4\,N$ at its ends. If the elongations of the two rods are equal,then the length of the steel rod $(L)$ is ........... $m$ $(Y_{Brass}=1.0\times 10^{11}\,N/m^2$ and $Y_{Steel} = 2.0 \times 10^{11}\,N/m^2)$.

Two wires $A$ and $B$ of the same length are made of the same material. The load $(F)$ vs. elongation $(x)$ graph for these two wires is shown in the figure. Which of the following statement$(s)$ is/are true?