$A$ rod of length $1000\, mm$ and coefficient of linear expansion $\alpha = 10^{-4} / ^\circ C$ is placed symmetrically between fixed walls separated by $1001\, mm$. The Young's modulus of the rod is $10^{11} N/m^2$. If the temperature is increased by $20^\circ C$,then the stress developed in the rod is ........... $MPa$.

Two wires $A$ and $B$ of the same cross-section are connected end to end. When the same tension is applied to both wires,the elongation in wire $B$ is twice the elongation in wire $A$. If $L_A$ and $L_B$ are the initial lengths of the wires $A$ and $B$ respectively,then (Young's modulus of material of wire $A = 2 \times 10^{11} \ Nm^{-2}$ and Young's modulus of material of wire $B = 1.1 \times 10^{11} \ Nm^{-2}$):

Four identical rods are stretched by the same force. The maximum extension is produced in:

The ratio of the areas of cross-sections of three wires is $1:2:3$ and the ratio of the Young's moduli of their materials is $3:2:1$. If the three wires are of the same length and the same stretching force is applied to the three wires, then the ratio of the elongations of the three wires is

In an experiment to determine the Young's modulus of a wire of length exactly $1\;m$,the extension in the length of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.02\;mm$ when a load of $1\;kg$ is applied. The diameter of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.01\;mm$. The error in the measurement of Young's modulus $(\Delta Y)$ is found to be $x \times 10^{10}\;N/m^2$. The value of $x$ is (Take $g = 10\;m/s^2$)

Let $L$ be the length and $d$ be the diameter of the cross-section of a wire. Wires of the same material with different $L$ and $d$ are subjected to the same tension along the length of the wire. In which of the following cases will the extension of the wire be the maximum?