$A$ steel rod with $Y = 2.0 \times 10^{11} \, N/m^2$ and $\alpha = 10^{-5} \, ^\circ C^{-1}$ of length $4 \, m$ and area of cross-section $10 \, cm^2$ is heated from $0^\circ C$ to $400^\circ C$ without being allowed to extend. The tension produced in the rod is $x \times 10^5 \, N$ where the value of $x$ is ....... .

$A$ uniform rod of mass $m$,length $L$,area of cross-section $A$ and Young's modulus $Y$ hangs from the ceiling. Its elongation under its own weight will be

In an experiment to determine the Young's modulus,steel wires of five different lengths $(1, 2, 3, 4$ and $5\,m)$ but of same cross-section $(2\,mm^2)$ were taken and curves between extension and load were obtained. The slope $(\text{extension/load})$ of the curves were plotted with the wire length and the following graph is obtained. If the Young's modulus of given steel wires is $x \times 10^{11}\,N/m^2$,then the value of $x$ is

The adjacent graph shows the extension $(\Delta l)$ of a wire of length $1\, m$ suspended from the top of a roof at one end and with a load $W$ connected to the other end. If the cross-sectional area of the wire is $10^{-6}\, m^2$,calculate the Young's modulus of the material of the wire.

If $\delta$ is the depression produced in a beam of length $L$,breadth $b$ and thickness $d$,when a load $W$ is placed at the mid-point,then:

The force required to stretch a steel wire of area of cross-section $1 \,mm^2$ to double its length is (Young's modulus of steel $= 2 \times 10^{11} \,N \,m^{-2}$)