The adjacent graph shows the extension $(\Delta l)$ of a wire of length $1\, m$ suspended from the top of a roof at one end and with a load $W$ connected to the other end. If the cross-sectional area of the wire is $10^{-6}\, m^2$,calculate the Young's modulus of the material of the wire.

The dimensions of four wires of the same material are given below. In which wire will the increase in length be maximum when the same tension is applied?

$A$ metal bar of length $L$ and area of cross-section $A$ is clamped between two rigid supports. For the material of the rod,its Young's modulus is $Y$ and coefficient of linear expansion is $\alpha$. If the temperature of the rod is increased by $\Delta t ^\circ C$,the force exerted by the rod on the supports is

$A$ steel wire of length $L$ and area of cross-section $A$ is suspended from a rigid support. If $Y$ is the Young's modulus of the material of the wire and $\alpha$ is the coefficient of linear expansion,then the increase in tension when the temperature falls by $t^{\circ} C$ is:

Young's modulus of a perfectly rigid body material is

$A$ steel wire of length $L$ at $40^{\circ} C$ is suspended from the ceiling and then a mass $m$ is hung from its free end. The wire is cooled down from $40^{\circ} C$ to $30^{\circ} C$ to regain its original length $L$. The coefficient of linear thermal expansion of the steel is $\alpha = 10^{-5} /^{\circ} C$,Young's modulus of steel is $Y = 10^{11} N/m^2$,and the radius of the wire is $r = 1 \ mm$. Assume that $L \gg$ diameter of the wire. Then the value of $m$ in $kg$ is nearly: