$A$ vertical rod of length $l$ is moved with constant velocity $v$ towards the east. If the vertical component of the Earth's magnetic field is $B$ and the angle of dip is $\theta$,then the induced $emf$ in the rod is:

$A$ long straight wire carries a current,$I = 2 \text{ A}$. $A$ semi-circular conducting rod is placed beside it on two conducting parallel rails of negligible resistance. Both the rails are parallel to the wire. The wire,the rod,and the rails lie in the same horizontal plane,as shown in the figure. Two ends of the semi-circular rod are at distances $1 \text{ cm}$ and $4 \text{ cm}$ from the wire. At time $t = 0$,the rod starts moving on the rails with a speed $v = 3.0 \text{ m/s}$. $A$ resistor $R = 1.4 \text{ } \Omega$ and a capacitor $C_0 = 5.0 \text{ } \mu\text{F}$ are connected in series between the rails. At time $t = 0$,$C_0$ is uncharged. Which of the following statement$(s)$ is(are) correct? $\left[\mu_0 = 4\pi \times 10^{-7} \text{ SI units}, \ln 2 = 0.7\right]$
$(A)$ Maximum current through $R$ is $1.2 \times 10^{-6} \text{ A}$
$(B)$ Maximum current through $R$ is $3.8 \times 10^{-6} \text{ A}$
$(C)$ Maximum charge on capacitor $C_0$ is $8.4 \times 10^{-12} \text{ C}$
$(D)$ Maximum charge on capacitor $C_0$ is $2.4 \times 10^{-12} \text{ C}$

$A$ conductor of length $l$ and mass $m$ can slide along a pair of vertical metal guides connected by a resistance $R$,as shown in the figure. Friction,resistance of the conductor,and guide rails are negligible. There exists a horizontal uniform magnetic field of strength $B$ normal to the plane of the page and directed outward. The terminal speed of fall under the influence of gravity is:

When a rod of length $l$ is rotated with angular velocity $\omega$ in a uniform magnetic field of induction $B$ perpendicular to the plane of rotation,about one of its ends,the induced emf across its ends is:

$A$ wire $ab$ of length $l$,mass $m$,and resistance $R$ slides on a smooth,thick pair of metallic rails joined at the bottom as shown in the figure. The plane of the rails makes an angle $\theta$ with the horizontal. $A$ vertical magnetic field $B$ exists in the region. If the wire slides on the rails at a constant speed $v$,then which of the following can be correct for $B$?

$A$ wheel with $10$ spokes,each of length $L \ m$,is rotated with a uniform angular velocity $\omega$ in a plane normal to a magnetic field $B$. What is the emf induced between the axle and the rim of the wheel?