On increasing the length by $0.5\, mm$ in a steel wire of length $2\, m$ and area of cross-section $2\, mm^2$,the force required is ($Y$ for steel $= 2.2 \times 10^{11}\, N/m^2$).

$A$ wire is loaded by $6 \ kg$ at its one end,the increase in length is $12 \ mm$. If the radius of the wire is doubled and all other magnitudes are unchanged,then the increase in length will be ......... $mm$.

The dimensions of four wires of the same material are given below. In which wire will the increase in length be maximum when the same tension is applied?

$A$ one metre steel wire of negligible mass and area of cross-section $0.01 \,cm^2$ is kept on a smooth horizontal table with one end fixed. $A$ ball of mass $1 \,kg$ is attached to the other end. The ball and the wire are rotating with an angular velocity of $\omega$. If the elongation of the wire is $2 \,mm$, then $\omega$ is (Young's modulus of steel $= 2 \times 10^{11} \,N/m^2$)

$A$ constant force is applied to a metal wire of length $L$. The volume of the wire remains constant. The extension produced is proportional to:

$A$ wire of length $L$ and radius $r$ is rigidly fixed at one end. On stretching the other end of the wire with a force $F$,the increase in length is $l$. If another wire of the same material but double the length and double the radius is stretched with a force $2F$,then the increase in length is: